PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC technology advantages: 1, the preparation time is short: The whole preparation time of graphite negative slurry is about 265~380 minutes, and in the subsequent preparation process, through the accumulation of several practical experiences, the viscosity test step can be omitted and the final vacuum defoamer process can be directly entered, which can save 30~40 minutes, if there are multiple devices to prepare the thickener solution first, it can save 60~100 minutes. Compared with the conventional graphite anode preparation process, which takes about 7 to 9 hours, the generating efficiency is greatly improved.
2, equipment wear is small: Only in the final vacuum defoaming process, the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic barrel needs to be vacuumed. Compared with the traditional process, the stirring system needs to be vacuumed during the slurry preparation process, resulting in difficult heat dissipation during the stirring process. The slurry temperature is easy to rise, has a substantial improvement effect, short time vacuum treatment to reduce equipment burden, reduce equipment wear;
3, low energy consumption: PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC preparation of graphite anode slurry solid content is about 45~55%, compared with the conventional preparation process, with high solid content, low viscosity characteristics, so the proportion of water used is also reduced. Reduce the energy consumption required for water evaporation in the subsequent coating process;
Contact: DELLA
Mob: +86-13929907491
