The PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal system for the production of lithium batteries comprises a screening device for removing Fe impurities from the slurry. The screening device comprises a cylinder and a ferromagnetic filter mechanism placed in the cylinder. The slurry enters the cylinder from the inlet end and is filtered by the ferromagnetic filter mechanism to remove Fe impurities, and then leaves from the discharge end of the cylinder.
The utility model can be implemented by the following PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC technology scheme: The ferromagnetic filter mechanism comprises a first ferromagnetic filter and a second ferromagnetic filter arranged in a cylinder. The first ferromagnetic filter and the second ferromagnetic filter are arranged in parallel and perpendicular to the axis direction of the cylinder. The mesh of the first ferromagnetic filter and the mesh of the second ferromagnetic filter are staggered along the axis direction of the cylinder, and the dimensions of the two are consistent.
PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic cylinder body is provided with a first filter and a second filter for removing non-iron granular impurities in the slurry at the feeding end and the discharging end respectively. The first filter and the second filter are made of stainless steel. The mesh size of the first filter is larger than that of the second filter. The turnover drum is provided with a vacuum pipe connected with a negative pressure mechanism.
Contact: DELLA
Mob: +86-13929907491
