Lithium battery material dry powder PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal equipment, in order to solve the problems raised in the technology. The drive motor is fixed in the box through bolts, the main shaft of the drive motor is installed with a cam, the top of the cam is placed with a guide plate, the upper surface of the guide plate is welded with a connecting rod, the connecting rod is placed in the limit sleeve, the top of the connecting rod is welded with a vibration block,
The vibration block is placed in the lower part of the edge of the filter screen; PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC The iron removal device is composed of one fixed rod, sealing sleeve, core, coil, two fixed rod and through hole; the shape of the core is circular, the core is wound with the coil, the outside, the front, rear and left side of the sealing ring,
The right side of the seal ring is connected with the second rod, and the ends of the first rod and the second rod are connected to the inner wall of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC box. The inclined plate is tilted on the top of the lower end cover. The discharge pipe is connected to the box at the lower right end of the inclined plate, with a control valve.
Contact: DELLA
Mob: +86-13929907491