LITHIUM battery cathode MATERIAL removal of iron PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC equipment Bearing box and collection box: A feeding port is arranged on the left side of the top of the bearing box, and the lower side of the feeding port is provided with a drainage plate, while the left side of the drainage plate is connected with the left side wall of the bearing box through the shaft rod, and the vibration motor is arranged on the lower side of the drainage plate, and the vibration motor is fixed in the bearing box.
At the same time, the upper side of the vibration motor is connected with the slide rod through the vibration rod, the slide rod is arranged in the slide rail, and the slide rail is fixed at the bottom of the drainage plate, the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC collection box is arranged in the inner bottom of the bearing box, and the left side of the collection box is provided with an outlet. At the same time, the outlet is arranged on the bearing box. The right side of the upper end of the bearing box is fixed with a bracket through the first bolt, and a motor is arranged on the bracket.
At the same time, the upper side of the motor is connected with the electromagnetic iron plate through the motor shaft, the electromagnetic iron plate is fixed on the left and right sides of the motor shaft through the second bolt, and the electromagnetic iron plate is arranged in the opening, and the opening is opened in the right end face of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC bearing box. A set iron box is arranged on the right side of the bracket.
Contact: DELLA
Mob: +86-13929907491
