The working principle of electromagnetic PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC is: produce magnetic field through electromagnetic induction, making the screen magnetism. When the material is supplied from the feeding port above the equipment, the material without magnetic material can pass, and the magnetic material can be adsorbed by the screen. To ensure the smooth passage of the material, the sieve and vibrator connection shall vibrate at a certain frequency.
The equipment needs to be cooled to ensure magnetic strength. In the preparation process of ternary materials, the electromagnetic PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC is mainly used for iron removal before the finished packaging of ternary materials. But the finished product of the ternary material itself has a certain weak magnetism. As can be seen from the figure below, the adsorption of ternary materials is already obvious when the magnetic force is up to 12,000 Gs. Therefore, the electromagnetic hammer is needed to strike in the magnetic separation process.
Electromagnetic dry powder PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC Its magnetic system is characterized by large packing Angle and multiple magnetic poles, the absolute value of magnetic flux density in the machine selection area is relatively average, can be designed according to the different properties of the ore; when the non-magnetic minerals out of the magnetic field, under the action of gravity, the mineral can be well separated from the magnetic cylinder;
Contact: DELLA
Mob: +86-13929907491