The graphite cathode material to be treated with iron is added to the slurry pool and adds water. The movable frame on the slide rail moves along the slide rail and moves back and forth under the action of the limit switch at both ends. The permanent magnet block of PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC is fixed by bolts, the permanent magnet block is a cuboid, and one long end is extended into the bottom of the slurry pool. The top height of the middle pool is lower than the height of the filter press outlet. The pulp pool is made of 304 stainless steel.
The agitator under the movable frame continuously stirred in the pool to form a evenly dispersed slurry, at the same time, the permanent magnet block at both ends of the movable frame is also moving in the pool, using the magnetic suction of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC permanent magnet block to continuously absorb the iron impurities in the graphite cathode material slurry in the slurry pool,
So as to achieve the purpose of graphite anode material PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal. When the iron impurities on the surface of the permanent magnet block accumulate to a certain extent, the permanent magnet block can be removed by the loose bolt and the iron impurities on the surface can be removed and fixed at both ends of the slide rail for further use.
Contact: DELLA
Mob: +86-13929907491
