In order to get better graphitization effect of PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal of iron, three aspects need to be done: 1, master the method of loading resistance materials and materials into the furnace (including horizontal loading, vertical loading, dislocation and mixed loading, etc.), and can adjust the distance between materials according to the different performance of resistance materials; 2. According to the different capacity of graphitization furnace and product specifications, different power curves are used to control the rate of rising and cooling in the graphitization process; 3. In specific cases, add catalysts to the ingredients to improve the degree of graphitization, namely "catalytic graphitization".
Difference: PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal of different quality of artificial graphite, rising and cooling rate, holding time, catalyst, etc., is expected to use different types of graphitization furnace, resulting in a large difference in performance and cost. From the front and back end of the process of graphitization, especially the rising and cooling process is basically programmed, but the graphitization time is long, equipment investment is large, so more outsourcing treatment, no technical leakage risk.
Artificial graphite manufacturing process can be divided into four steps, more than ten small procedures, granulation, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal and graphitization are the key.
Contact: DELLA
Mob: +86-13929907491
