LITHIUM battery MATERIAL PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal device, including a crushing cylinder and removal box; The crushing cylinder is provided with a feeding port support rod, a motor plate, a rotating shaft, a conical wheel post, a first motor, a funnel barrel, a connecting rod and a scraper; The feed port is arranged on the end face of the grinding cylinder, and the feed port is convenient for the worker to put the lithium battery material into the grinding cylinder;
There are two support rods, which are respectively fixed horizontally in the middle of the front and back edges of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC feed port; The motor plate is fixed horizontally between the two support rods, and the motor plate is in the middle of the feed port; The rotating shaft is vertically arranged in the middle of the lower end of the motor plate; The middle position of the upper end of the cone wheel column is fixed on the lower end of the rotating shaft, and the big head of the cone wheel column is on the upper side and the small head is on the lower side. The cone wheel column is used to roll the battery material into powder;
The first motor is firmly connected in the middle of the upper end of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC plate and the main shaft of the first motor passes through the motor plate and is connected with the upper end of the rotating shaft. The first motor drives the conical wheel column to rotate through the rotating shaft, which is convenient for rolling the battery material;
Contact: DELLA
Mob: +86-13929907491
