A leading enterprise has successfully reduced the Fe₂O₃ content of quartz sand from 80ppm to below 6ppm by adopting a three-stage series high-gradient PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC process, reaching the international advanced level. A certain manufacturing plant introduced the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic separation system to replace the original flocculation and sedimentation process, increasing the COD removal rate by 40%, saving 120 tons of water daily, and reducing the emission of chemical agents by over 100 tons annually.
In the field of deep purification of industrial wastewater, especially for complex wastewater containing heavy metals, oil stains and suspended solids discharged from industries such as metallurgy, electroplating and electronics, wet high-gradient PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC chemical sedimentation generates less sludge and makes subsequent treatment simple. For the separation of non-magnetic minerals (such as potassium feldspar and spodumene), the combined process of "flotation + magnetic separation" is often adopted
For large-scale industrial water treatment projects, if low energy consumption and high throughput are pursued, superconducting PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic separation technology is undoubtedly an ideal choice - its single-machine processing capacity can reach over 1000m³/h, and the power consumption per ton of water is less than 0.5kWh. It has been successfully applied in multiple industrial parks.
Contact: DELLA
Mob: +86-13929907491
