LITHIUM battery in the production process, lithium battery MATERIAL PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal device; The grinding cylinder is provided with a feeding port, a support rod, a motor plate, a rotating shaft, a conical wheel post, a first motor, a funnel barrel, a connecting rod and a scraper; The feed port is arranged at the end face of the grinding cylinder; The support rod has two, which are respectively fixed horizontally in the middle position of the front and back edges of the feed port;
LITHIUM battery materials need to be crushed, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal of iron, screening and mixing and other operations to ensure quality, to use for production, generally crushing and iron removal is carried out separately, not only time-consuming and laborious, but also a waste of resources, increasing the burden of the economy, And the current iron removal equipment in iron removal, slurry or dry powder raw materials into the equipment, easy to stick to the inner wall of the equipment, resulting in less recycled raw materials,
And generally when recycling raw materials, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC discharge port if not covered by the device, the battery powder will spread into the air, once inhaled by the human body, it will harm health, and used for absorbing the iron material in the battery material equipment, If there is no relevant treatment equipment to deal with the battery material stuck on the surface of the device, a long time will lead to the working effect of the adsorption device is not obvious.
Contact: DELLA
Mob: +86-13929907491
