PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal system for lithium battery production, its beneficial effect is shown in: two layers of ferromagnetic filter mesh interlayer arrangement, so that Fe impurities in the slurry can be thoroughly adsorbed and removed. The two layers of stainless steel filter make the granular impurities in the slurry fully removed.
The PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal system enables the particle impurities in the slurry to be filtered at the same time, further remove the Fe impurities, improve the purity of the slurry, optimize the product performance, and improve the consistency of the battery group. The vacuum pipe is arranged on the turnover drum, and the external vacuum system provides the power for the slurry to fall in the screening device, ensuring that it passes quickly through the stainless steel filter and the ferromagnetic filter.
The PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic removal system comprises a slurry barrel for storing slurry slurry and a turnover barrel for storing slurry slurry after removing iron respectively communicated with the inlet end and discharge end of the screening device through a pipeline. The bottom of the turnover barrel is provided with a discharge pipe. It has the advantages of simple structure, convenient operation, high degree of automation, simple replacement of filter, etc. At the same time, the manual operation is reduced, the production cost is reduced, the realization of automation is easy, and the production efficiency is improved.
Contact: DELLA
Mob: +86-13929907491
