Lithium ion battery slurry PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC in addition to the iron device including mixing tank, cover on the mixing tank, mixing tank is composed of mutual set together inside the mixing tank and external mixing tank, the gap between the mixing tank and the mixing tank, the mixing tank bottom with vertical extension of the feeding pipe, outside the bottom of the mixing tank for the displacement of the feed pipe,
At the bottom of the outer mixing tank, the outlet pipe of PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC is connected through the gap; the top of the inner mixing tank is lower than the top of the outer mixing tank, so that there is an outlet channel between the top and the top cover of the inner mixing tank, and the outlet channel is connected with the gap;
The slurry is uniformly transported to the mixing tank through the screw pump, and the slurry enters from the bottom and overflows from the top to avoid the flow of the slurry; the stirring of the magnetic rod of PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC maximizes the contact area between the slurry and the magnetic rod and effectively conducts iron removal. After cleaning, the permanent magnet rod is removed, the mixing frame loses its magnetism and can be cleaned with slurry solvent.
Contact: DELLA
Mob: +86-13929907491
