In order to solve some technical problems, the utility model PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC adopts the following technical solutions: the feeding device includes the corresponding connected mortar pump, the filter press and the feeding bin; the iron removal device includes the slurry pool, the movable frame set above the slurry tank, the driving mechanism for driving the movement of the movable frame, the agitator installed under the movable frame, the permanent magnet block moving direction along the two sides of the movable frame, and the slurry pool is equipped with the corresponding outlet at the bottom of the mortar pump.
The drive mechanism includes the drive motor, gear and the rack and slide rail cooperated with the gear, the drive motor is installed vertically on the active rack, the gear is installed on the drive motor shaft, the rack is installed in the middle of the slurry pool and the parallel active rack moving direction is coordinated with the gear, the mobile side of the slurry pool is parallel with the slide rail, the slide rail is connected with the active rack, the limit switch on both ends of the slide rail, the limit switch is connected with the drive electric electromechanical.
The water circulation device includes the intermediate pool and the circulating water pump. The water outlet of the filter press is connected to the middle pool, and the slurry pool is connected to the middle pool through the circulating water pump. There is a sampling hole on the upper side of the grouting tank, which is connected with a discharge valve.
Contact: DELLA
Mob: +86-13929907491
