PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC for iron removal can be basically divided into two categories: carbon-based materials and non-carbon-based materials. Carbon-based materials mainly include natural graphite, artificial graphite, composite graphite, mesophase carbon microspheres and disordered hard carbon and soft carbon. Non-carbon based materials are mainly divided into silicon based materials, lithium titanate anode materials and lithium metal anode materials.
Relatively speaking, each process of artificial graphite anode is more mature in technology, so more is the optimization of PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC process and cost comparison, the size, distribution and morphology of graphite particles in the process of granulation have a greater impact on the performance index of the anode. Enterprises need to balance the advantages of small particles in magnification performance and cycle life, as well as the disadvantages in first efficiency and compaction density, and also weigh the impact of particle morphology on magnification and low temperature performance. High-end artificial graphite is generally granulated twice after graphitization, and 7-8 small particles are pasted to give consideration to expansibility and energy density.
Graphitization belongs to the extension of the traditional carbon industry, from the current point of view, graphite iron removal PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC technology mature but for cost control, high-end artificial graphite usually use ultra-high temperature graphite iron removal process cost is higher.
Contact: DELLA
Mob: +86-13929907491
