Process flow of nickel-cobalt lithium manganate
Step 1: tons of package material, the second step: measuring ingredients, the third step: high mix, the fourth step: bowls, step 5: a sintering step 6: unloading port, step 7: double roller, step 8: mechanical crushing, step 9: measure ingredients, step 10: wet coated, step 11: bowl again, on the sintering again, in three steps: 10, unloading port, step 14: double to roll, Step 15: billet, step 16: screening, step 17 :PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal, step 18: packaging.
Matters needing attention in the production process:
The sieved LITHIUM nickel-cobalt ACID requires the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal step before and after batch mixing can be carried out for batch mixing homogenization.
In the process of feeding, it is necessary to measure the weight in advance, because the change of the weight often has a fatal effect on the formula, and it is usually necessary to control the error within two thousandths.
In the case of pulverizing equipment, an alumina ceramic is required inside the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC device, which has the advantage of preventing REDOX.
Contact: DELLA
Mob: +86-13929907491
