Slurry for LITHIUM battery production PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal system A slurry barrel for storing slurry and a turnover barrel for storing slurry after removing iron, which are respectively connected with the feed end and the discharge end of the screening device through a pipeline. The bottom of the turnover drum is provided with a discharge pipe. The turnover drum is provided with a vacuum pipe connected with a negative pressure mechanism.
Usually, it takes 3 to 4 hours to mix and glue, or even longer. After the Jun methyl cellulose steel is fully mixed and dissolved, the conductive agent and the negative carbon MATERIAL of PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal of iron can be added, and finally the adhesive can be added and mixed evenly to prepare the negative electrode slurry for the ion battery.
When preparing Jun methyl cellulose steel glue liquid, high-speed dispersing mixer can also be used for centralized gluing, which only takes 1.5 to 2.5 hours. After the configuration of the glue liquid is completed, the weight of the glue liquid required in the negative slurry of PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic removal is measured and the finished glue liquid is added to the strong mixing tank, and then the subsequent batching is carried out.
Contact: DELLA
Mob: +86-13929907491
