PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC Magnetic When the work is finished, pull the collection box to the left to slide it in the carrying box until it is pulled out of the carrying box to facilitate the removal of the material in it. The right side of the upper end of the bearing box is fixed with a bracket, and a motor is arranged on the bracket, while the upper side of the motor is connected with the electromagnetic iron plate through the motor shaft, and the bracket is threaded with the bearing box through the first bolt.
The first bolt is set symmetrically. When the first bolt is removed, the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC bracket can be removed from the end face of the bearing box to facilitate the maintenance of the equipment. The electromagnetic iron plate is fixed on the left and right sides of the motor shaft through the second bolt, and the electromagnetic iron plate is arranged in the opening. At the same time, the opening is opened on the right end face of the bearing box, and the motor is rotating-connected with the electromagnetic iron plate through the motor shaft, and the motor shaft is a "t" shaped structure.
At the same time PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic plate symmetrical setting, the electromagnetic plate can be rotated under the action of the motor and the motor shaft, so that the two electromagnetic plates take turns to work, when the left electromagnetic plate in the magnet, the right electromagnetic plate power off, in order to facilitate the collection of iron filings,
Contact: DELLA
Mob: +86-13929907491
