At the bottom of the external mixing tank on the side of the hole, there is a vertical extension of the feeding pipe, the feeding pipe and the discharge pipe, the discharge pipe and the gap, the top of the internal mixing tank is 3cm lower than the top of the external mixing tank, so that there is a discharging channel between the top and the top of the internal mixing tank, the discharge channel is connected with the gap,
The slurry overflows from the top of the inner mixing tank along the gap, through the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC discharge pipe, and the discharge pipe is equipped with a ball valve; the top of the outer mixing tank is equipped with a silicone sealing ring. The mixing tank is equipped with a mixing device, the mixing device includes the rotation of the rotating shaft, four mixing frame, the rotating shaft up to the top cover and the motor output shaft connection,
In use, the motor rotation frequency can be adjusted in the range of 25 hz; four mixing racks are vertically connected to the rotating shaft. The PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC mixing rack is hollow cylinder structure and equipped with permanent magnet rod. The mixing rack is a hollow cylinder with a diameter of 5cm and a length of 8cm. The inner wall of the hollow cylinder is equipped with internal threads, which can be locked close to the permanent magnet rod.
Contact: DELLA
Mob: +86-13929907491
