Ternary MATERIAL PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC process flow and the intermediate control point, of course, a good ternary material production, its precursor is also very important, the following will briefly talk about the precursor synthesis process. Firstly, a metal ion mixed solution with a certain concentration is configured according to the stoichiometric ratio, and an ammonia-alkali mixed solution with a certain concentration is configured as a precipitating agent and complexing agent, and nitrogen is continuously injected into the reactor to make the reactor atmosphere nitrogen for reaction.
By adjusting the pH value of the solution, the composite precipitate is produced, and the precursor is obtained directly after filtration, washing and vacuum drying. It involves the choice of precipitating agent, the use of complexing agent, the choice of feeding method, the control of reaction atmosphere, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC process and so on.
Industrial production generally chooses lithium hydroxide and lithium carbonate, but lithium hydroxide contains crystal water, the mixing effect is not good, so lithium carbonate is used more. The most common minerals containing lithium are spodumene and brine. It can also be seen from the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC process of the positive electrode material that the development of terpolymer materials plays an important role in improving the energy density of the entire power battery.
Контакт: DELLA
Mob: +86-13929907491
