Market pattern is relatively dispersed, the gap between enterprises is not obvious. PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC for iron removal ternary cathode material, the top three enterprises of ternary cathode output accounted for 15.7%/13.9%/10.6%, the shares between enterprises are relatively close, the industry as a whole is still in a relatively dispersed stage. The energy density performance of the high voltage route tends to be consistent with that of the high nickel ternary with the rise of the middle nickel voltage platform.
By increasing the battery charging cutoff voltage, the high voltage route makes the cathode MATERIAL release more LITHIUM ions at higher voltage, thus improving the capacity and working voltage at the same time, so as to achieve the purpose of removing iron PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC to improve the energy density. The actual energy density of the typical product of high voltage Ni6 is close to that of the typical product of Ni8, which is 739.32Wh/kg, 735.15Wh/kg.
At the same time, due to the relatively low nickel content of high-voltage materials, the production process is not as complex as high-nickel ternary, so high-voltage PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal anode material not only improves the energy density, but also has some safety improvement. The ternary anode material increases the power battery energy density by increasing the upper limit of charging voltage (high voltage) and nickel content (high nickel).
Contact: DELLA
Mob: +86-13929907491
