During the raw material pretreatment stage, disc-type PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC can be installed before the feeding ports of raw materials such as lithium salt and zirconium oxide to intercept mechanical wear debris. In the final quality inspection, the rotating permanent magnet drum performs layered scanning purification on the solid electrolyte sheets after pressing and forming, ensuring flawless quality before factory release.
For conveyor systems exceeding 1.6 meters in width with substantial material layer thickness, suspended electromagnetic PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC is recommended due to its strong magnetic penetration and extensive coverage. For fine powders with excellent fluidity and low impurity content, a multi-stage PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC configuration is preferable. This system first applies belt-type primary removal, followed by drawer-type precision removal for secondary purification, forming a "coarse-precision" graded purification chain.
In the production process, pipeline-type electromagnetic PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC is connected in series to the airflow conveying pipeline to capture suspended iron powder in real time. The selection strategy should be adapted to local conditions. A solid-state battery manufacturer has configured a four-stage magnetic separation system on its production line, which can stabilize the iron content in the product below 0.5 ppm, reaching the international leading level.
Contact: DELLA
Mob: +86-13929907491
