PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC Magnetic preparation device continuously agitates the slurry in the tank through the stirring component before blanking. The spiral turning leaf in the stirring component can prevent the deposition of active materials in the slurry, so that the slurry composition on the diaphragm is uniform.
In addition, the slurry can be laid flat on the upper surface of the diaphragm through the feeding nozzle, and the thickness of the electrode prepared by PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC field can be uniform everywhere through the further coating of the coating plate. The drying device is different from the traditional hot air drying. The hot air discharged from the hot air strip pipe is pre-dried before drying, and then it is compacted by the hot press roller.
In addition, the heat on the hot press roll can be transferred during the compaction process, thus accelerating the drying of the slurry on the rear diaphragm, which can not only ensure the drying effect, but also effectively prevent the electrode sheet material from cracking after drying. It can effectively guarantee the quality of sodium ion anode plate prepared by PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC. The structure design is novel and the use effect is excellent.
Contact: DELLA
Mob: +86-13929907491
