Because the installation method, production process and the use of auxiliary materials of various PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC are quite different, the quality of anode materials produced by different furnace types is also significantly different. Graphitization mainly has two kinds of production processes, intermittent and continuous, among which continuous graphitization furnace is the development direction of graphitization in the future. According to different heating methods, graphitization mainly has two kinds of production processes: intermittent and continuous.
After the equipment is filled, the electric heating process is entered. The electrodes on both sides of the graphite PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC field are energized to remove iron. After reaching a certain temperature in the cylinder, the top is capped and the gas collector is set. Finally, the carbon material contained in the crucible is treated at high temperature to reduce the impurities on the edge of amorphous carbon microcrystalline structure and make it have the characteristics of graphite crystal structure.
In the process of intermittent graphitization, materials need to go through the processes of installing, heating, graphitizing, cooling and power failure. The graphitization process mainly includes placing the negative electrode MATERIAL evenly into the graphite crucible, and then lifting it into the graphitization furnace through the crane, placing the resistance material into the periphery of the graphite crucible at the furnace core, and then covering the insulation material, and filling the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC field, that is, completing the packaging.
Contact: DELLA
Mob: +86-13929907491
