During the production process of cathode materials, iron impurities can be introduced through various means. In the mixing process, different powder raw materials need to be thoroughly mixed. However, during this process, the inner walls and stirring components of the mixing equipment can rub against the powder, leading to wear on the equipment and the generation of iron filings. During the grinding process, the grinding medium, such as grinding balls, continuously contacts the powder, and the wear of the grinding balls can also introduce iron impurities. PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC is used to remove these iron impurities
The friction between the material and the transmission pipeline may also produce iron chips. If these iron impurities cannot be removed in time, they will be mixed into the cathode material and affect its performance. Therefore, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC can be installed at the key process nodes to monitor and remove the mixed iron impurities in real time to ensure the purity of the cathode material
In the wet synthesis process of ternary materials, high gradient PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC can effectively remove ferromagnetic particles in the slurry. High gradient magnetic separation iron remover has a unique design. It uses high strength magnetic field and special magnetic medium to produce high gradient magnetic field distribution
Contact: DELLA
Mob: +86-13929907491
