PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC field working principle: The crushed material enters the filter sleeve from the feeding sleeve, and falls into the magnet leakage plate in the sleeve through the feeding port on the magnet plate, the motor rotates, the driving wheel drives the eccentric wheel through the belt, at this time, the turntable can drive the screen to rotate, the material falls from the magnet leakage plate in the sleeve, and completes the iron removal through the screen.
The top of the rotating rod is located at the shaft center at the bottom of the eccentric wheel, and the driving wheel is connected with the left eccentric wheel drive through the belt, and the belt is inserted into the right side surface of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC screening box body. Through the motor, eccentric wheel, turntable, conical magnet, magnet leakage plate and screen mesh are used together, when the material enters the magnet leakage plate in the sleeve through the feed port, the motor rotation, under the action of the eccentric wheel, the material in the sleeve can be screened.
At this time, the second PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic removal of the material, to solve the problem of slow iron removal efficiency in the prior art, can further remove the iron in the material, the use of conical magnets, can remove the iron through the magnet leakage plate material for the third time, Thus, the amount of iron removal is increased, and the quality of lithium battery production is guaranteed.
Contact: DELLA
Mob: +86-13929907491