The lithium ion material is separated by adding chemicals to precipitate the iron ions. According to the chemical properties of iron ions, choose the appropriate precipitant, sodium hydroxide, sodium carbonate, etc. When the precipitant is added to the solution containing iron ions, the iron ions react with the precipitant to form iron hydroxide, iron carbonate and other precipitation. Then adjust the pH of the solution and other conditions to precipitate the iron ions, and the precipitation is formed to separate the precipitation from the solution by PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC method.
When processing the lithium battery electrolyte, sodium hydroxide is added to adjust the pH value to make the iron ion form iron hydroxide precipitate, and then filter the precipitate to get the electrolyte after iron removal. First, most of the magnetic iron impurities were removed by PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC, and then the remaining small amount of iron impurities were removed by chemistry.
PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC The vibrating screen makes the material pass through the sieve network through high frequency vibration, and the material of different grain size falls from different sieve holes to achieve separation. For iron impurities with larger particles, the screen with larger aperture can be selected for preliminary screening, and then further iron removal treatment for fine particulate matter material.
Contact: DELLA
Mob: +86-13929907491
