The graphitized material is transported to PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC through vacuum for physical mixing and iron removal, and the 270 target molecular sieve is used for screening, and the sieve material is tested, measured, packaged and stored. The sieve is screened after further grinding meets the particle size requirements. In the production process of graphite cathode materials, it is necessary to remove the iron and its oxide impurities mixed in the raw materials, otherwise it will seriously affect the performance of graphite cathode materials.
PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC Made of artificial graphite will be applied in the metallurgical industry, machinery industry, chemical industry, its thermal conductivity, corrosion resistance will be higher than natural graphite and polymer resin composite materials. At present, lithium ion secondary battery mainly uses graphite powder as the cathode material of its conductive cathode, and its particle size is usually between 3 μ m~30 μ m.
Graphite anode material wet PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal system, does not need to consume sulfuric acid or hydrochloric acid and other chemical reagents, to avoid the generation of flammable and explosive hydrogen safety risks, but also to avoid the existing technology of acid removal treatment produces a large number of wastewater pollution of the environment, reduce the cost.
Contact: DELLA
Mob: +86-13929907491
