The fixing plate is located just below the middle of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC screening box, and the bearing sleeve is connected to the middle of the top of the fixing plate. The diameter of the sleeve is two-thirds of the distance between the left and right sides of the inner wall of the screening box body, and the sleeve is located directly below the filter sleeve. The output end of the motor is located at the axis at the top of the driving wheel, and the top of the rotating rod is located at the axis at the bottom of the eccentric wheel.
The bottom of the conical magnet is located in the middle of the top of the turntable, and the bottom end of the feeding sleeve is connected to the middle of the top of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC screening box. And the magnet plate is provided with a feeding port, the lithium battery material is slowly poured from the feeding sleeve, the magnet plate can absorb the iron in the material, so that the iron in the material can be effectively removed.
The four sides of the bottom of the side wall of the screening box are fixed connected with the four sides of the fixing plate through a fixing rod. The top of the fixing plate is connected with a bearing. The fixing plate is located just below the middle of the body cavity of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC Magnetic screening box, and the bearing is connected to the middle of the top of the fixing plate. The bearing is covered with a rotating rod, and the top of the rotating rod is fixed connected with the bottom of the eccentric wheel.
Contact: DELLA
Mob: +86-13929907491
