In the use of LITHIUM battery cathode MATERIAL PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC screening iron removal device, the device is first placed in the required location, connected to the external power supply, lithium battery cathode material through the feed port into the bearing box, the material falls on the drainage plate, start the vibration motor, The vibration motor drives the vibration rod to vibrate, and the slide rod slides left and right in the slide rail, while the left side of the drainage plate rotates under the action of the shaft rod.
Thus, the vibration of the drainage plate plays a certain auxiliary role, the MATERIAL then slides to the right, the right side of the support is provided with a collection box, and the collection box is placed on the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC bearing box, and the collection box is arranged on the lower side of the electromagnetic iron plate. At the same time, the electromagnetic iron plate is energized. In the process of falling, the doped iron filings can be adsorbed on the left electromagnetic iron plate.
When the left electromagnetic iron plate is full of iron filings, start the motor, the motor drives the motor shaft to rotate, thereby driving the electromagnetic iron plate to rotate 180 degrees, so as to turn the left electromagnetic iron plate to the right side, and power off, the iron filings fall in the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC collection box, An electromagnetic iron plate at the same time at the opening
Contact: DELLA
Mob: +86-13929907491
