Because the iron powder is fine and attracted by the magnetic field, it is difficult and time to clean the traditional equipment. Moreover, when the slurry is dry, it will produce large dust, which will affect the health of workers in the open environment. If it is closed, it is not convenient to clean the magnet. PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC Can remove the iron (FE2O3) from the cathode material.
Lithium battery cathode material PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC in addition to the iron device features: including: external case, separation device, shock, the outer case internal equipped with partition, material port, the partition level setting, the outer box into the upper and lower two parts, partition above the storage for the negative paste, partition below the installation separation belt, material is the opening on the partition;
The separation belt includes the conveyor belt and drive wheel, three drive wheels, three drive wheels are connected into a right triangle, the conveyor belt is wrapped on the drive wheel, rotating with the drive wheel, the conveyor belt is also equipped with several magnetic strips, the movement direction of the conveyor belt; the overall connection with the drive wheel and conveyor belt, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC shaking the negative material on the separation belt by vibration, and thus separated from the iron powder.
Contact: DELLA
Mob: +86-13929907491
