The Highest Point Of The Upper Feeding Permanent Magnet Canister - Belt Block Dry Type PTMS Magnetic Separator Can Reach 5 Million T
PTMS Magnetic Separation
How Can You Separate Magnetic Substances From Non Magnetic Substances?
Dry weak magnetic field PTMS magnetic separator mainly includes large ore dry type permanent magnet PTMS magnetic separator and dry cylinder PTMS magnetic separator two categories. With single/double cylinder permanent magnet PTMS is common magnetic separator, the series of PTMS magnetic separator using strontium ferrite permanent magnet piece as magnetic system, the magnetic field strength can reach 84 ~ 100 kA/m, it is mainly used for fine-grained strong magnetic kaolin clay, sodium, potassium feldspar, quartz sand ore dry separation, can also be applied to remove magnetic material from the powder material, its advantage is that while throwing waste of mineral enrichment, improves the grade. PTMS magnetic separator can remove the iron inside (Fe2O3). In recent years, with the continuous development of magnetic materials, PTMS will be permanent magnet cylinder PTMS magnetic separator magnetic source changed to high-performance permanent magnet NdFeB material, or made of high-performance rare earth NdFeB material and high quality ferrite material mixed. This greatly enhances the magnetic induction intensity of the separator on the surface of the cylinder (up to 0.8T), and further improves the magnetic separation efficiency of this series of PTMS magnetic separators. In addition, the cylinder type PTMS magnetic separator, the machine uses the surface of the magnetic system as the working face, so that the selected material in the work area increase the number of turning. At the same time, the most commonly used strontium ferrite and NdFeB permanent magnet as magnetic pole, improve the magnetic field strength and its gradient, increase the recovery strength of the weak magnetic material in the abrasive, suitable for the removal of ferromagnetic impurities in nonmetallic mineral kaolin. Bulk ore dry type PTMS magnetic separator, commonly known as magnetic pulley, is mainly used in the crushing process before self-grinding or ball grinding pre-separation work. Permanent magnet magnetic roller into the bulk ore dry type PTMS magnetic separator to make it into the climax of production. Dry PTMS magnetic separator, has become a large ore dry permanent magnet PTMS magnetic separator model in China. This machine is a kind of upper permanent magnet barrel - belt type block ore dry type PTMS magnetic separator, using high performance full NdFeB magnetic system, the roller surface selective magnetic induction intensity can reach more than 4 million T, the highest point can reach 5 million T. And the position of the magnetic system in the drum can be adjusted, the magnetic field along the axial distribution is more uniform, has a better separation index, has been widely used in kaolin, potassium sodium feldspar, quartz sand concentrators.
In addition, the characteristics of PTMS magnetic separator magnetic pulley, dry permanent magnet magnetic pulley, sorting kaolin, potassium albinite, quartz sand mixed ore, can be abandoned yield of 12.00%, grade of 15.00% below the tailings, PTMS magnetic separator can remove the iron inside (Fe2O3). The sorting particle size can reach 100 ~ 300 mm. Dry permanent magnet PTMS magnetic separator, cylinder surface field strength can be up to 5 million T, processing the maximum particle size of 250 mm, PTMS magnetic separator can remove the iron inside (Fe2O3). Processing capacity up to 460t/ h.
How can you separate magnetic substances from non magnetic substances?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com