Graphite PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC process or purification process cycle will be 15-22 days. After the end of electric heating, the top of the cylinder is opened, and the material is left to cool until it returns to normal temperature, which is the end of the production process. Under normal circumstances, continuous graphite iron removal is not actually a specific graphitization process, and the existing continuous graphite iron removal has a variety of forms.
The so-called continuous graphite PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC process is relative to the intermittent graphite process, generally refers to the production of no power failure process, graphitized products need to go through a series of temperature zones, so as to achieve continuous graphitization. The principle is to first send the prepared bulk petroleum coke with a particle size of 1~30 mm into the hopper by the feeding device.
After drying and calcination, the steam and volatiles produced are discharged; Then enter the high temperature area to complete the graphite PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal process; Finally into the bottom of the barrel cooler, cooling to 200~300 ℃, open the gate at the bottom of the cooler discharge, natural cooling to room temperature.
Contact: DELLA
Mob: +86-13929907491