Lithium ion battery cathode material in the production process, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC in addition to iron throughout the whole process of cathode material preparation, once the metal impurities in the cathode material, especially the existence of elemental iron can cause short circuit of lithium ion battery, serious will lead to battery failure or explosion, in addition if large particles in magnetic metal material was not detected, directly into the ceramic grinder,
PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC Electromagnetic plate symmetry setting, electromagnetic iron plate can be turned under the action of motor and motor shaft, so that the two electromagnetic plate work in turn, when the left electromagnetic plate on the iron, on the right side of the electromagnetic plate power, in order to collect iron scrap, the right side of the bracket set iron box, and set iron box placed on the bearing box, and iron box set under the electromagnetic plate.
Crushing opportunity internal ceramic accessories will be broken, the accessories are expensive, and the material will be contaminated, will bring huge losses to the enterprise. At present, the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal equipment commonly used in the whole manufacturing process of cathode materials are pipe iron remover and electromagnetic magnetic separator,
Contact: DELLA
Mob: +86-13929907491
